Manufacturer of welded plate heat exchangers made from stainless steel, nickel alloys and titanium. Specifications include 0.11 to 1.72 sq.m heat transfer area, 1 and 1.2 mm plate thickness, 333 to 1,219 mm plate length and 333 to 1,219 mm plate width. Operating temperature ranges from -50 to 375 degrees C and up to 42 bar pressure. Suitable for high heat transfer rates at low pressure drops. Serves the chemical processing, oil and gas production, power generation, renewable energy, marine, refrigeration and other industries. Meets ASME standards.

Manufacturer of standard and custom graphite and ceramic heat exchangers for small materials and chemical processers to large multi-national corporations. Can meet stringent design constraints and custom requests. Types include shell and tube, cylindrical and cubic block exchangers. Heat exchangers are resistant to fatigue, corrosion, acid, thermal shock, water/steam hammer and other mechanical abuse. While the U-Max® ceramic is universally corrosion and erosion resistance, the Impervite® graphite is suitable for processing mixed acids, sulfuric acid, hydrochloric acid, phosphoric acid, nitric acid, waste acids and chlorinated hydrocarbons and also for corrosive condensing, vaporizing, absorbing, heating and cooling applications. Meets ASME standards.

Custom manufacturer of heat exchangers made from standard & specialty alloys for commercial/residential HVAC applications. Types include shell & tube, double-wall tube & double pipe heat exchangers. Nominal sizes range from 4 in. to 60 in. Meets TEMA B, C & R standards. ASME U, UM & R certified. Emergency repair & rush shipments are available.

Manufacturer of standard and custom shell and tube heat exchangers. Made from corrosion resistant stainless steel, Hastelloy®, alloy-20, Monel®, titanium, and other alloys. Options include insulation, horizontal saddles or vertical mounting supports, vacuum breakers, sight glasses, floating tube sheets, davit arms, insulation jackets, and hinged channel covers. Serves the food, beverage, cannabis, chemical, HVAC, dairy, personal care, pharmaceutical and sanitary industries. Meets ASME and TEMA standards.

Manufacturer a variety of shell & tube heat exchangers including units for hard water & other high fouling applications, units built to ASME code & rated at 150 PSIG at 350 degrees F & double wall units are suitable for potable water heating systems & other applications where cross contamination of fluids is a potential hazard. Also custom designs & fabricates a wide variety of other shell & tube heat exchangers including U-tube exchangers, condensers, evaporators, tank heaters, suction heaters, aftercoolers, intercoolers, oil coolers & double-wall heat exchangers.

Custom manufacturer of heat exchangers. Types include plate type heat exchangers and shell and tube heat exchangers. WordStrment heat exchangers, indirect fire heaters, pre-coolers and concentrators are also available.

Custom manufacturer of rugged construction aluminum and copper-brass heat exchangers. Bar or brazed plate, round tube, plate frame, mechanically expanded, parallel flow, tube, plate and serpentine fin type heat exchangers are available. Suitable for paper or steel mills, power units, presses, rail, forestry, municipal vehicles, forklifts, cranes, material handling and power generation applications. Serves the construction, agriculture, mining, process, oil and gas industries. Made in USA.

Custom manufacturer of heat exchangers. Types include U-tube and straight-thru heat exchangers. Available in various specifications according to customer requirements. Capabilities include designing, fabrication, and installation. Works with all carbon steel grades, various stainless steel grades, nickel, and Monel®. Consulting, field erection, repairs, and lining services are also available. Serves the chemical, food processing, petrochemical, and pharmaceutical industries.

Distributor of shell, plate or tube heat exchangers and heat transfer equipment. Repair services are available. Secondary services include cleaning, designing and troubleshooting.

Manufacturer of plate heat exchangers used to exchange heat between two fluids. Available in 50 to 437 degrees F operating temperature. Maximum static pressure ranges up to 435 psi. Features include 316 stainless steel, copper and nickel brazed plates and mounting brackets. Serves the agriculture, automotive, construction, gearbox, elevator, commercial, municipal, power generation, pulp and paper, railway, shipbuilding and steel and heavy industries. Meets ASME, NFPA and API standards. CSA approved. CE certified.

Manufacturer of standard and custom industrial HVAC equipment. Various types include heat exhangers, buffer, bladder, shock and surge, specialty, fire protection, chilled and hot water, expansion, compression, diaphragm, filtration, hydropneumatic, galvanized, blowdown and flash tanks. Meets ASME standards. One year warranty. On-time delivery.

Custom manufacturer of heat exchangers. Inspection, maintenance, calibration, reverse engineering, machining, installation, welding and repair services are also offered.

Manufacturer of standard and custom waste heat recovery systems including closed loop, high particulate and combustion air pre-heat systems. combustion air pre-heat system components include air to air heat exchangers, modified burners and combustion air/exhaust gas ductwork. Used for plant process heating and combustion air/boiler feedwater pre-heating. Utilizes combustion air, water, glycol solution and thermal oil. Suitable for saving fuel consumption. Audit, testing, engineering, design, training, retrofit and inspection services are also available. Meets ASME and AWS standards.

Manufacturer of standard and custom air-cooled, brazed and gasketed plate heat exchangers. Features vary depending upon model, including aluminum construction, bar and plate cores, single and double circuit options and 316L stainless steel plates, leak ports. Serves the chemical, pulp, paper, biofuel, sugar processing, petroleum, power generation, mining and general industries.

Custom manufacturer of industrial process heating and manufacturing equipment including conveyor components, oven conveyors, epoxy curing ovens and heat exchangers. Facilities include design, sales, manufacturing, renovation, installation service and component part sales. Products include ovens, dryers, furnaces and kilns, process fume incinerators, heat recuperation systems, combustion chambers, process air heaters, packaged control systems, textile calender roll heating systems and pre-drying equipment for web applications.

Distributor of heat exchangers made from plastic and stainless steel. Suitable for heating and cooling of process fluids. Available in a variety of configurations. 24/7 services and stock items available. Same day shipping.

Custom manufacturer of packaged assemblies including heat exchangers. Various features include temperature controls, floor, wall or ceiling mounting style frames and optional high and low flow and temperature alarms and cut-offs, temperature control packages and circulation pumps. Heat exchangers are suitable for use in indoor, outdoor, weatherproof and explosion-proof environments.

Custom manufacturer of heat exchangers. Available in carbon & PVQ, high carbon & chrome-molybdenum steel alloys, aluminum, copper, manganese steel alloys, cobalt alloys & high wear-resistant alloys. Welding capabilities include TIG, MIG, sub arc, stick & flux core welding. Plate rolling, straightening, bending for bars, beams, steel plates, angles & channels, plasma bevel cutting, high definition plasma cutting, heavy plate shearing and laser cutting, burnouts, steel plate burning, press brake forming, heat treating, CNC machining, vertical turning, milling, engineering & consulting services are available.

Custom manufacturer & designer of air cooled heat exchangers including coils & heaters. Heat exchangers can be designed & fabricated to custom specifications. 450 psig rated coils are thermal shock, freezing & water hammer resistant & are available with minimum 14 ga. steel or stainless steel welded airtight casings, corrosion resistant steel & stainless steel cores & steel fins. Heaters are available with steel cores, steel spiral wound fins, TEFC motors & steel or stainless steel fan blades in capacities ranging from 20,000 btu/hour to 3,000,000 btu/hour.

Stocking distributor of air and water heat exchangers. Available in different capacity ratings and voltage ratings. Stainless steel options are available. 24 hour telephone support services and same day shipping for emergency deliveries are available.

Custom manufacturer of corrosion-resistant thermoplastic heat exchangers. Product offerings include shell and tube and modular in tank bundle with mini PTFE/PFA designs, PFA coiled rectangle, and drop-in bundle features. Available in various sizes up to 1152 square foot and PE, PP, PPn, PVDF, and PFA materials. Suitable for electroplating, industries and clean, and photovoltaic and semiconductor process applications. FOB shipping.

Distributor of custom heat exchangers. Types include recuperator, plate type, radiant tube, indirect air and gas heat exchangers. Refractories, burners, boilers, blowers, valves, controllers, recorders and switches also available. Mechanical and electrical engineering services offered. Suitable for automotive, baking, chemical, food, petrochemicals, printing, textiles as well as institutional, commercial and miscellaneous applications.

Manufacturer of standard and custom plate and frame heat exchangers. Shell and tube heat exchangers are also offered. Suitable for chillers, cooling towers and adiabatic and dry coolers. Serves the aerospace, alcohol, beverage, chemical, dairy, food, electronics, metallizing, printing, plastics processing, HVAC, machining, rubber and welding industries.

ISO 9001:2008 certified. Manufacturer and distributor of heat exchangers. Types include triple, L-shaped and in-line helical fluoropolymer heat exchangers. Features include non-conductive, inlet and outlet manifolds and anti-floatation brackets. Capabilities include design, fabrication, anodizing, chromating, cleaning, electropolishing and turnkey systems integration. Suitable for semiconductor, industrial, electronics, solar, medical and other applications.